Return to previous page

Heterogeneous Luxury Seats

The standard chunk of Lorem Ipisum used since the 1500s reproduced below. Sections 1.10.32 and 1.10.3 “de Finibus Bonorum suffered alteration.
Read More

Grid
List
Show
Placeholder

Meanwell Power Supply RSP-750-24

Rated 0 out of 5
₹14,785.00

  • Output Voltage: 24V DC

  • Output Current: 31.3A

  • Rated Power: 751.2W

  • Input Voltage Range: 90 ~ 264VAC, 127 ~ 370VDC

  • Efficiency: ~90%

  • Ripple & Noise: ≤ 150mVp-p

  • Voltage Adjustment Range: 21.6 ~ 28.8V

  • Overload Protection: 105 ~ 135% rated output power (constant current limiting, auto recovery)

  • Overvoltage Protection: 29 ~ 34.8V

  • Setup, Rise, Hold-up Time: 1500ms, 50ms, 16ms at full load & 230VAC

  • Isolation Voltage:

    • Input to Output: 3kVAC

    • Input to FG: 2kVAC

    • Output to FG: 0.5kVAC

  • Working Temperature: -30°C ~ +70°C (derating required above 50°C)

  • Cooling Method: Built-in DC Fan, speed control by load & temperature

  • Functions:

    • Remote ON/OFF control

    • Remote sense

    • Power good & auxiliary power (5V/0.3A)

    • Active power factor correction (PFC)

  • Protection: Short circuit / Overload / Overvoltage / Overtemperature

  • Safety Standards: UL62368-1, TUV BS EN/EN62368-1, EAC

  • Dimension (L×W×H): 295 × 127 × 41mm

  • Weight: ~1.8kg

Placeholder

Meanwell Power Supply SDR-75-24

Rated 0 out of 5
₹3,103.00

  • Output: 24V DC, 3.2A, 76.8W

  • Efficiency: ~89%

  • Voltage Adj. Range: 24~28V

  • Protection: O/P short / Overload / Overvoltage / Overtemp

  • Features: Active PFC, DC OK relay

  • Cooling: Natural air convection

  • Temp Range: -25°C ~ +70°C

  • Mounting: DIN Rail TS-35/7.5 or 15

  • Size / Weight: 32×125.2×102mm / 0.63kg

Placeholder

Meanwell Power Supply SE-450-12

Rated 0 out of 5
₹8,814.00

  • Output: 12V DC, 37.5A, 450W

  • Efficiency: ~82%

  • Voltage Adj. Range: 10.2~13.8V

  • Protection: O/P short / Overload / Overvoltage / Overtemp

  • Cooling: Forced air by built-in fan

  • Temp Range: -20°C ~ +60°C

  • Size / Weight: 247×127×63.5mm / 2.1kg

  • Safety: UL / CE approved

Placeholder

Meanwell Power Supply SE-600-24

Rated 0 out of 5
₹10,295.00

  • Output: 24 V DC at 25 A (600 W total

  • Input Voltage Range:

    • AC: 90–132 VAC or 180–264 VAC (selectable via switch)

    • DC: 254–370 VDC

  • Efficiency: Up to ~87%

  • Operating Temperature: –20 °C to +60 °C (derating above ~50 °C per datasheet)

  • Cooling: Forced-air cooling via built-in fan

  • Protections: Short-circuit, overload, over-voltage, over-temperature; can survive 300 VAC surge input for 5 seconds

  • Other Features: Remote sense function, 150% peak load support for 100 ms, active surge current limiting, LED power-on indicator

  • Certifications & Safety: UL/CB approval, isolation withstand 3 kVAC between input and output, MTBF ≈360,000 hours at 25 °C (drops to ~143,000 h at 40 °C)

  • Mechanical: Enclosed metal chassis; dimensions ~247 × 127 × 63.5 mm; chassis-mount design (~2.5 in × 5 in × 9.7 in)

Placeholder

Meanwell Power Supply TDR-240-24

Rated 0 out of 5
₹6,705.00

  • Output Voltage: 24V DC

  • Output Current: 10A

  • Rated Power: 240W

  • Input Voltage Range: 3-phase 340 ~ 550VAC or 480 ~ 780VDC

  • Efficiency: ~89%

  • Ripple & Noise: ≤ 150mVp-p

  • Voltage Adjustment Range: 24 ~ 28V

  • Overload Protection: 105 ~ 150% rated output power (constant current limiting, auto recovery)

  • Overvoltage Protection: 29 ~ 33V

  • Setup, Rise, Hold-up Time: 2000ms, 60ms, 16ms at full load & 400VAC

  • Isolation Voltage:

    • Input to Output: 3kVAC

    • Input to FG: 2kVAC

    • Output to FG: 500VAC

  • Working Temperature: -30°C ~ +70°C

  • Cooling Method: Natural air convection

  • Functions:

    • High efficiency, long life, and high reliability

    • Overvoltage, overload, overtemperature protection

    • Parallel operation possible

  • Safety Standards: UL62368-1, TUV BS EN/EN62368-1, EAC

  • Mounting: DIN Rail TS-35/7.5 or 15

  • Dimension (L×W×H): 121 × 85 × 118mm

  • Weight: ~1.2kg

Placeholder

Meanwell Power Supply WDR-480-48

Rated 0 out of 5
₹15,723.00

  • Output Voltage: 48 V DC

  • Rated Output Current: 10 A → 480 W total power

  • AC Input Voltage Range: 180–550 VAC (single or two-phase) and DC input support up to ~780 VDC

  • Efficiency: Approximately 93%

  • Operating Temperature: –30 °C to +70 °C (with derating at extreme low input)

  • Protections & Features: Includes short-circuit, overload, over-voltage, and over-temperature protection; built-in active PFC; DC‑OK relay contact; 100% full-load burn-in; convection cooling (no fan)

  • Certifications: UL508 industrial control, CE, CB, EN61000‑6‑2 EMC industrial immunity standards

  • Mounting Format: DIN‑rail TS‑35/7.5 or 15; enclosed slim metal case (approx. 128.5 × 85.5 × 125.2 mm; ~1.7 kg weight)

⚙️ Model Comparison: WDR‑480‑24 vs. WDR‑480‑48

Micro Flow Rate Liquid Flow Meter Model F7M9030AQ100100D0

Micro Flow Rate Liquid Flow Meter Model F7M9030AQ100100D0

Rated 0 out of 5
₹68,000.00
By combining a thermal MEMS sensor and a highly corrosion-resistant quartz glass flow path, the product can measure micro flow rates liquid flow of under 50 mL/min with a high degree of repeatability, which would be a difficult for traditional measurement methods. Product development was based on the concept of adopting a measurement method that is minimally susceptible to changes in the state of the fluid (e.g., bubbles, pulsation, fluid temperature changes), and making the product user-friendly, with easy-to-use correction functions for measured fluids (correction based on the thermal conductivity of the fluid). Measuring the instantaneous and integrating flow rates instead of previous methods (e.g., measuring the pump rotation speed, measuring the weight, or managing the fluid supply time) contributes reliable quality management and detection of anomalies in process based on measured values.
ML100-55/103/115

ML100-55/103/115

Rated 0 out of 5
₹2,478.00
Effective detection range : 0 ... 5 m Reflector distance : 0.02...5m Threshold detection range : 7 m Reference target : H50 Reflector Light Source : LED Light Type : modulated visible red light Optical Face : Frontal
Placeholder

ML100-55/95/103

Rated 0 out of 5
₹2,218.00

  • Series: ML100

  • Type: Photoelectric sensor

  • Operating principle: Thru-beam system (emitter + receiver)

  • Sensing range: Up to 12 m (typical)

  • Light source: Red light, modulated

  • Connection: Cable, 2 m (standard)

  • Housing material: Plastic (ABS / PMMA)

  • Mounting: Compact rectangular housing, easy installation

  • Supply voltage: 10–30 V DC

  • Output type: PNP or NPN (model dependent)

  • Switching frequency: ~250 Hz

  • Protection class: IP67

  • Ambient temperature: –25 °C … +55 °C

  • Special feature: Reliable detection with high immunity to ambient light

ML100-8-1000-RT/102/115

ML100-8-1000-RT/102/115

Rated 0 out of 5
₹2,006.00
Detection Range: 0 ... 1000 mm Adjustment Range: 100 ... 1000 mm Reference Target: standard white, 100 mm x 100 mm Light Source: LED Light Type: modulated visible red light Diameter of the light spot: approx. 75 mm at a distance of 1000 mm Optical Face: Frontal
Placeholder

MS-DP1-2

Rated 0 out of 5
₹448.00

  • Type: Panel mounting bracket (accessory)

  • Compatible with: Panasonic DP-100 series digital pressure sensors (e.g., DP-101, DP-102)

  • Panel thickness supported: 1–6 mm

  • Adjacent mounting: Possible, requires ≥55 mm spacing between sensors

  • Mounting method:

    • Adapter on sensor front → insert into panel → slide bracket from rear

  • Removal: Press removal levers & pull bracket out (adapter is single-use only)

  • Weight: ~10.3 g

  • Compliance: RoHS compliant

Placeholder

MS-NA2-1

Rated 0 out of 5
₹901.00

  • Type: Mounting bracket set for NA2 series area sensors

  • Compatibility: Fits slim body NA2 sensors (all beam models)

  • Material: Metal (durable construction)

  • Set Includes: 1 mounting bracket + screws

  • Use: Secure and easy installation of NA2 sensors on machines or conveyors

  • Special Note: Designed to maintain correct alignment of emitter & receiver

Home
Shop
3 Cart
More
More